BL600-Sx Hardware Integration Guide
Single Mode BLE Module
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth
7
CONN-HIG-BL600
2
S
PECIFICATION
2.1
Specification Summary
Table 1: Specifications
Categories
Feature
Implementation
Wireless Specification
Bluetooth®
V4.0 – Single Mode
Slave (from base FW v1.1.50.0 onwards)
Frequency
2.402 - 2.480 GHz
Maximum Transmit Power
Setting
4 dBm Conducted BL600-SA
4 dBm Conducted BL600-SC
~2.5 dBm Conducted BL600-ST (RSMA
connector on dev board)
Minimum Transmit Power
Setting
-20 dBm (in 4 dB steps) with
smart
BASIC command
-16 dBm
-12 dBm
- 8 dBm
- 4 dBm
0 dBm
TX Whisper Mode1
Transmit Power
-30 dBm (min) with
smart
BASIC command
TX Whisper Mode2
Transmit Power
-55 dBm (min) with
smart
BASIC command
Receive Sensitivity
(0.1% BER)
-91 dBm typical
Link Budget
95 dB (@ 1 Mbps)
Range
Up to 100 m in free space
TX Whisper Modes
Range reduction feature with TX Whisper Modes
with
smart
BASIC command.
Range
(TX Whisper Mode 2)
<~30 cm
Raw Data Rates
1 Mbps (over the air)
Host Interface and
Peripherals
TOTAL
28 x Multifunction I/O lines
UART
TX, RX, CTS, RTS
DCD, RI, DTR, DSR, CTS, RTS (Note 1)
Default 9600, n,8, 1
From 1,200 to 115,200bps
BL600-Sx-04 onwards has improved UART with
Deep RX buffer (6 bytes instead 2 bytes).
GPIO
Up to 28, with configurable: I/O direction,
O/P drive strength (standard 0.5 mA or high 5 mA),
Pull-up /pull-down
ADC
Six 10-bit channels (including ADC reference)
10 bit resolution
1.2 V internal reference
