Laird BL600-SA Hardware Integration Manual Download Page 51 | Manualshive

Page: 51 / 51

background image

BL600-Sx Hardware Integration Guide

Single Mode BLE Module

Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
www.lairdtech.com/bluetooth

51

CONN-HIG-BL600

Laird is the world leader in the design and manufacture of customized,
performance-critical products for wireless and other advanced electronics applications.

Laird Technologies partners with its customers to find solutions for applications in various
industries such as:



Network Equipment



Telecommunications



Data Communications



Automotive Electronics



Computers



Aerospace



Military



Medical Equipment



Consumer Electronics

Laird offers its customers unique product solutions, dedication
to research and development, as well as a seamless network of
manufacturing and customer support facilities across the globe.

CONN-HIG-BL600
Copyright © 2014 Laird. All rights reserved.
The information contained in this manual and the accompanying software programs are copyrighted and all rights are reserved by
Laird Technologies, Inc. Laird Technologies, Inc. reserves the right to make periodic modifications of this product without obligation to
notify any person or entity of such revision. Copying, duplicating, selling, or otherwise distributing any part of this product or
accompanying documentation/software without the prior consent of an authorized representative of Laird Technologies, Inc. is strictly
prohibited.
All brands and product names in this publication are registered trademarks or trademarks of their respective holders.
This material is preliminary
Information furnished by Laird Technologies in this specification is believed to be accurate. Devices sold by Laird Technologies are
covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. Laird Technologies makes no
warranty, express, statutory, and implied or by description, regarding the information set forth herein. Laird Technologies reserves the
right to change specifications at any time and without notice. Laird Technologies’ products are intended for use in normal commercial
and industrial applications. Applications requiring unusual environmental requirements such as military, medical life-support or
life-sustaining equipment are specifically not recommended without additional testing for such application.
Limited Warranty, Disclaimer, Limitation of Liability

USA: +1.800.492.2320

Europe: +44.1628.858.940

Asia: +852.2923-0610

[email protected]

www.lairdtech.com/wireless

«
...
49
50
51

Summary of Contents for BL600-SA




















































Reviews:

No comments

Related manuals for BL600-SA

Brand: Ubisys Pages: 2

Brand: 1Control Pages: 8

Brand: vacuubrand Pages: 12

Brand: Vacon Pages: 47

Brand: Vacon Pages: 40

Brand: WABCO Pages: 4

Brand: Rayrun Pages: 4

Brand: Parker Pages: 29

HydroTap G5 Touch-Free Wave

Brand: Zip Pages: 24

Brand: East Coast Datacom Pages: 14

Brand: oventrop Pages: 64

Brand: S&C Pages: 26

Brand: Texas Instruments Pages: 25

Brand: Vag Pages: 19

Brand: Carrier Pages: 86

Brand: Hoffer Pages: 57

Brand: Rain Bird Pages: 7

Brand: Danfoss Pages: 118

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands