LAIKA Kreos 5009, Manual

Page: 96 / 126

17.8 Rear bed with manual handling
To raise or lower the bed:
1) Move the lever to position (c).
2) Insert the handle (a) into the coupling (b);
3) Turn the handle;
4) Once the desired position has been reached, return
the lever to position (d).
17.9 Other components
17.9.1 Snap in tilting piece
To open the tilting piece, pull it upward until it snaps in
position. To close it, pull the catches (a) outwards, then
lower it.
17.9.2 Bed safety net
When using the bed, the safety net, if provided, must
always be hooked with the straps to the appropriate
supports on the ceiling.
17 - INTERNAL COMPONENTS
96
USER’S GUIDE
a
a
a
b
c
a
Before using the bed, check that the lever is in
position (d).
WARNING
d
The safety net can be under the mattress of the bed.
NOTE