manualshive.com logo in svg

LAIKA Kreos 5009, Manual

The LAIKA Kreos 5009 is an advanced recreational vehicle designed for adventurers. To make the most of this exceptional product, download the detailed user manual for free from manualshive.com. This comprehensive manual ensures you fully grasp the vehicle's functionalities, enhancing your camping experience.

Share
Download
background image

1.12 Front passenger side airbag and 

child restraint systems 

1.13 Automatic transmission manual 

unlocking (Iveco) 

On vehicles with Iveco chassis and automatic trans-
mission, remove the grille (a) on the floor, between the 
cabin seats, to access the transmission manual 
unlocking device.

1 - SAFETY

12

USER’S GUIDE

Never use a backward-facing child restraint system 
on a seat protected by an active frontal airbag. Risk 
of death or serious injury to the child. 

WARNING

Refer to the chassis manual for information on the 
transmission manual unlocking device.

WARNING

a

Summary of Contents for Kreos 5009































































































































Reviews:

No comments

Related manuals for Kreos 5009

MDC XT-17 Manual preview
XT-17
Brand: MDC Pages: 12

Brands by name

Popular brands

Load more brands