manualshive.com logo in svg

LAIKA Kreos 5009, Manual

The LAIKA Kreos 5009 is an advanced recreational vehicle designed for adventurers. To make the most of this exceptional product, download the detailed user manual for free from manualshive.com. This comprehensive manual ensures you fully grasp the vehicle's functionalities, enhancing your camping experience.

Share
Download
background image

5.3.8 Polyplastic StarView 

a) Sliding mosquito net. 
b) Sliding blind. 
c) Internal handle in closing position. 
d) Internal handle in permanent air vent position. 
e) Internal handle in open position. 
f) Knob for fixing the tube stay (open position).

5.3.9 Vehicles with electric drop-down 

bed over the dinette (optional) 

5 - WINDOWS AND ROOF LIGHTS

30

USER’S GUIDE

If the vehicle is provided with an electric drop-down 
bed over the dinette (optional), when the vehicle is 
parked for a long time under the sun, the bed must 
not remain in fully raised position: leave a space of 
at least 10 cm between the roof-light and the bed 
mattress.

WARNING

a

b

d

e

f

c

Summary of Contents for Kreos 5009































































































































Reviews:

No comments

Related manuals for Kreos 5009

Brands by name

Popular brands

Load more brands