LAIKA Kreos 5009 Manual Download Page 70

Page: 70 / 126

12.6 Kitchen additional work-

surfaces

The kitchens of some models have additional
removable work-surfaces.
When travelling, remove the additional tops and stow
them in a closed area. To release the tops from their
guides, pull them upwards.

12 - GAS SYSTEM

USER’S GUIDE

When using the grill, extract the heat protection
plate (d) and leave the oven door open.

WARNING

• Do not obstruct the air circulation grilles.
• Do not leave the vehicle unattended when the

oven or burners are on.

• Do not insert paper bags (or similar) when heating

up food.

• Do not use ovens or burners during the journey.
• Do not close the glass cover of the hob until the

gas-rings have cooled off.

• Do not use burners to heat the vehicle.
• Do not use detergents containing chlorine,

abrasive detergents, scourers or metal brushes to
clean stainless steel surfaces.

THINGS TO AVOID

• Push the ignition button only with the oven door

completely opened .

• Clean after use with specific oven and stainless

steel cleaners.

• After use, carefully dry all stainless steel

surfaces.

THINGS TO DO

Summary of Contents for Kreos 5009































































































































Search results

Summary of Contents for Kreos 5009

Reviews:

Related manuals for Kreos 5009

Brands by name

Popular brands

LAIKA Kreos 5009, Manual

Search results

Summary of Contents for Kreos 5009

Reviews:

Related manuals for Kreos 5009

Brands by name

Popular brands