LAIKA Kreos 5009 Manual Download Page 57

Page: 57 / 126

10.1 Kosmo series

12 V distribution control unit - Fuses

Side-marker lights.

Fridge 12 V power supply.

Water pump.

Fridge control board.

Electric bed.

Heating.

Electric entrance step.

DIR output.

Gas hob ignition.

10) Awning light.
11) Lights group B.
12) Lights group A.

10 - CONTROL UNIT - FUSES

USER’S GUIDE

The control unit is located inside the settee behind
the right cabin seat (Ecovip and Kreos series).

NOTE

For information on the connections of the control
unit, refer to the manufacturer's manual.

NOTE

Quantify the loads with skilled personnel before
installing electric optional equipment other than
those of the standard outfit and carefully determine
the type of connection to be made.

WARNING

Some fuses are related to optional devices, or are
not available on some models.

NOTE

If the vehicle is equipped with a diesel fuelled
Truma heating (optional), its fuse will be 20 A
instead of 10 A.

NOTE

The control unit is located under the left cabin seat
(Kosmo series).

NOTE

Summary of Contents for Kreos 5009































































































































Search results

Summary of Contents for Kreos 5009

Reviews:

Related manuals for Kreos 5009

Brands by name

Popular brands

LAIKA Kreos 5009, Manual

Search results

Summary of Contents for Kreos 5009

Reviews:

Related manuals for Kreos 5009

Brands by name

Popular brands