LAI Games FireFighter, Operator'S Manual

Page: 38 / 58

Operator's Manual
–
FireFighter
©
LAI GAMES
Page 33

POWER CORD
The power cord is a standard IEC power cord (as used on computers) that is
plugged in to the power inlet socket at the rear of the machine. The power cord
can be removed for transport.

POWER INLET
The power inlet is located at the rear of the machine on the Left-hand side as
viewed from the rear. It is a standard IEC inlet socket.

MAINS SWITCH
The mains switch is located on the power inlet assembly along with the mains
fuse, and IEC inlet socket.

FUSES
For locations of all fuses refer to Fuses and Fuse location, page 28 of this manual.

PCB’s
For location of all game PCB‟s, refer to the Parts Location diagram page 30 of this
manual.

POWER SUPPLY
The power supply is located on the base of the upper cabinet and is accessed from
the rear of the machine. It is a 12V 13A switching power supply.

TRANSFORMERS
There are two transformers located on the base of the upper cabinet and is
accessed from the rear of the machine. They supply the 24VAC for the Level and
Target Lamps.

COOLING FANS
There is are two medium size cooling fans located on the bottom left and right rear
of the upper cabinet. Access is through the upper rear door at the back of the
machine.

TARGET REED SWITCH
The target reed switches are located in the rear of the lower cabinet. They are
activated by magnets mounted on the rear of the swinging targets. Access is
through the rear lower door.

WATER FILTER
The water filter is located to the left in the rear of the lower cabinet. Access is
through the rear lower door. The lower part of the filter is detachable for removal
and replacement of the filter cartridge.

PUMPS
Two 12VDC are located to the right in the rear of the lower cabinet, one for each
player water cannon. Access is through the rear lower door.
* WARNING! *
Always turn OFF Mains power and unplugged the game, before replacing any
fuses
Always use the correct rated fuse. Refer to page 28 for fuse information.