LAI Games FireFighter, Operator'S Manual

Page: 10 / 58

Operator's Manual
–
FireFighter
©
LAI GAMES
Page 5
ASSEMBLY INSTRUCTIONS
The
“Fire Fighter”
is shipped in two main sections, the Upper Cabinet , containing
most of the controlling electronics and the Lower Cabinet , containing the water system
and player controls. The game should not be shipped fully assembled as this could
cause damage to the
Both Cabinets .

Position the Lower Cabinet nearby to its final location. The cabinet has four
heavy duty castors to allow easy repositioning of the game. Remove the four M12
x 80mm Bolts from the back mounting section and make sure it‟s clear of any
wires or obstructions.

Position the Upper Cabinet on the floor near the back of the Lower Cabinet
with the header facing the front. Unwrap and remove the back door of the Upper
Cabinet , this will give better grip when lifting the Upper Cabinet into place.
Using at least two persons, one at each side, lift the Upper Cabinet into position
on the Lower Cabinet . Using the four M12 x 80mm Bolts , mount the Upper
Cabinet tight to the Lower Cabinet .

Feed the Cables from the Upper Cabinet through the hole down into the Lower
Cabinet . Mate all the connectors together; they are keyed to prevent incorrect
connection. Remove the four Philip head screws from the red metal bracket just
above the Hydrant Targets. Position the Acrylic Splash Guard with the rubber
edging pressing up against the Display Glass and fit and tighten screws, don‟t
over tighten or it may crack the acrylic.
* CAUTION! *
Water needs to be added to the game BEFORE running the pumps.
Prolonged dry running of the pumps can shorten their life.
See page 6 on how to fill and setup the water system.
Upper
Cabinet
Lower
Cabinet
Splash
Guard
Mounting
Bolts
Cable
Connections