LAHTI PRO L1540500 Page 6 Instruction Manual Download

Page: 6 / 64

PROTECTIONOFTHEENVIRONMENT:

CAUTION!

The symbol nearby denotes that old equipment

must never be thrown away together with other waste (with
the penalty of a fine). Hazardous components of electronic
equipment may adversely affect the natural environment and
humanhealth.

Each household may contribute to the recovery and reuse (recycling) of

old machinery and equipment. Both in Poland and Europe a system for

recovery of used equipment either exists or is being created. The system

obliges all organizations that sell such equipment to collect the used

machinery and appliances. Moreover, general purpose collecting points

for such equipment are available.

11. FILTER SYMBOLS:

MODEL: ADF GX-800S

– model of the auto darkening filter;

CAN/CSA Z94.3

– Canadian safety standard;

ANSI Z87.1

– American safety standard;

4/9-13 GX 1/1/1/2/379 CE

– marking of a welding filter with manual

setting of protection degree, where:

- number of clear state;

– number of the brightest dark state;

–

number of the brightest state;

- optical

manufacturer's symbol;

–

class;

- diffusion of light class;

- variation of luminous transmittance

class;

- angle dependency class;

- number of European standard for

379

auto darkening welding filters EN 379,

- sign of conformity with new

approach Directives.

IMPORTER/AUTHORIZEDREPRESENTATIVE:

Profix Sp. z o.o.,

ul. Marywilska 34,

03-228 Warszawa, Polska

The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the company
reserves the right to make amendments to the product specification without a prior notice. The images included into the
operation manual are only of the exemplary nature and may slightly differ from actual appearance of the device purchased.
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.

12. WARRANTY:

In order to be provided a warranty service, the user has to return a defective product at the point of sale or to an authorised distributor or reseller of PROFIX

where it was purchased. Learn about the return policy prior to returning a product. Usually, product identification data, including model number and serial

number and a detailed description of the problem are necessary. A receipt that confirms the purchase and the validity of the warranty has to be submitted as

well.

1. The warranty runs for two years following purchase.

2. Any defects found during the warranty period shall be removed free of charge within 14 business days after the product was delivered at seller's address.

The warranty period is extended by the repair time.

3. A warranty card is valid if it contains purchase date, stamp of the point of sale, or a sales receipt.

4. In order for a product to be repaired, it has to be delivered at user's cost to the point of sale. After repair, the product shall be sent to the claimant at

warrantor's cost.

5. The claimant should deliver the helmet appropriately protected against damage for transport.

6. The claimant shall be liable for the helmet being lost during delivery to the point of sale and the warrantor is obliged to deliver a repaired helmet to the

claimant and shall be liable for it being lost during transport.

7. During the warranty period, damaged equipment shall be repaired by the warrantor or replaced with new one that is the same and undamaged free of

charge. If it is impossible to repair or replace the device with a new one, the claimant may have the amount paid returned or select a different device with

similar specification and features. Any financial discrepancies shall be compensated by the warrantor or the claimant depending on the price of the

selected device.

8. This warranty covers defects that occurred during appropriate use or were caused by factory defects and does not apply to consumables or other

additional equipment.

9. The warranty does not cover defects that resulted from:

Repairs, modifications, or changes in the structure made by the user or other unauthorised persons.

Mechanical, thermal, chemical damage or deliberate damage.

Helmet storage and maintenance and other damage attributable to the user.

Decreased product quality that results from wear and tear, e.g. abrasion of the external coating, scratches, broken glass, etc.

Damage caused by improper and unintended use.

The warrantor may refuse to accept a claim if the sales document has a formal defect, such as not filled in warranty card, no purchase receipt, etc.

SERVICE CENTRE ADDRESS:
Profix Sp. z o.o.