2
USER'S MANUAL
: L1500800, L1500900
SAFETY GLASSES
Original text translation
WARNING! These glasses do not provide unlimited
eye protection. Before you start using these
glasses read all safety use warnings and tips.
Failure to observe the safety warnings and tips provided
below may result in serious injuries.
Keep these warnings and tips for future reference.
n
Application:
These glasses are designed to provide eye protection against fast
moving fine particles. The glasses meet the requirements of Regulation
2016/425
The internet address where the
and EN 166:2001 standard.
EU declaration of conformity can be accessed: www.lahtipro.pl
The glasses are intended to provide eye protection against mechanical
impacts caused by such particles as: metal filings, wood or wall chips.
The glasses should be worn when carrying out various operations at
sites where a risk of damage to the eye caused by the above-listed
factors occurs.
It is prohibited to use them to protect eyes during welding.
The size of glasses is universal.
NOTE:
In case of any damage to the safety glasses stop working
immediatelyandreplacethembynewones.
WARNING:
Glasses with scratched or damaged protective
lenses should be replaced.
n
Protection efficiency:
The glasses are resistant to a low-energy impact of particles (a 0.86 g
ball at an impact speed of 45 m/s ) and protect against ultraviolet
radiation (see“Technical Specification”).
WARNING: Eye protective glasses designed to
protect the eye against the impact of high speed
particles worn together with corrective
eyeglasses can transfer the impact causing a risk to the user.
NOTE:
If any protection against high speed solid particles at extreme
temperatures is required, the eye protection selected should be marked
with letter T following directly the symbol of impact protection, i.e. FT, BT
or AT. If the safety glasses are not marked with letter T placed directly after
the symbol of impact protection, the eye protection can be used to protect
againsthighspeedparticlesatroomtemperatureonly.
Cleaning, maintenance, disinfection:
Do not clean the glasses with any abrasive, scratching or caustic agents.
Clean them with warm water and mild soap.
After cleaning wipe them dry with a cotton or flannel cloth. Use alcohol
to disinfect the parts that touch the user's skin.
NOTE:
«Technical
Materials used to manufacture the glasses (see table
specifications»
) usually do not cause any allergic reactions. However,
some rare cases of such reactions can occur in people allergic to plastics.
Should it occur, stop wearing the safety glasses immediately and consult a
doctor.
n
Storage and transport:
To protect the safety glasses against damage, store them in a case. Store
the glasses in a place at a humidity of below 90% and at temperature
ranging from 5 to 40 °C. Store them away from any chemical and
abrasive substances and at a minimum distance of 2 metres from
heating devices.
Factory packaged safety glasses can be carried by any means of
transport under conditions described above when providing additional
protection against mechanical damage.
n
Spare parts and accessories:
Use only original and properly selected spare parts.
n
Durability:
Check the safety glasses for any damage on a regular basis. The glasses
lose their usability if any damage, loss in lenses transparency,
discolorations, scratches or lens or frame cracks occurs. In such cases it is
necessary to replace the glasses by a new pair.
n
Identification of symbols:
SGI
–
;
manufacturer's symbol
9844
–
;
model
2C-1.2
– catalogue number of anti-UV filter, unchanged perception of
colours;
5-3.1
–
;
sun glare filter catalog number
1
–
;
optical class
F
– low impact energy; resistance to the impact of a 0.86 g steel ball at
45 m/s;
166
–
.
number of standard used to assess the conformity
Serial number ending with ZDI found on the product or packaging.
n
Notified body:
The process of standard compliance assessment has been performed by
notified body No. 0530.
CERTOTTICA, Instituto Italiano per la Cerificazione dei prodotti Ottici
Scrl, Zona IndustrialeVillanowa I-32013, Longarone BL, Italy.
Importer / Authorized representative:
PROFIX Co. Ltd.
Addres:
34, Marywilska St., 03-228Warsaw, Poland
This
protected by copyright.
without the written consent of PROFIX Co. Ltd. is prohibited.
user's manual is
Copying it
Protection efficiency
Optical class
Filter
Materials
F
1
L1500800:
2C-1.2 –
UV filter,
unchanged perception of colours;
L1500900:
5-3.1 – sun glare filter;
polycarbonate
TECHNICAL SPECIFICATIONS:
EN
