Laguna Tools MSANWB25X60-1K-7.5-0197, Manual

Page: 9 / 62

9
The Widebelt Sander consists of a number of major parts, which are discussed in this
manual. Take the time to read this
section and become familiar with the
machine.
Identification.
There is a plate on the machine listing all
the manufacturing data, including the
model.
1. Control panel
The control panel controls all the
electrical functions of the machine. This
includes the speed of the drive belt,
vertical adjustment of the bed and
on/off functions.
2. Bed vertical setting device
This device is used to set the
height of the bed in relation to the
sanding rollers.
3. Manual bed vertical adjusting
handle
This handle is used to manually
adjust the bed vertically.
4. Bed
The bed of the sander has a rubber
drive belt that transports the job
through the machine. The speed of
the belt is adjustable.
5. Safety plate
The safety plate is used to remove
power from the motors. This is very
convenient should a job get
jammed, as it can be operated by
hand, leg or hip.
6. Machine body
The machine body is manufactured
from heavy-gauge steel.
7. Dust extraction
There are three or two dust
extraction pipes located on the top
of the machine that are 5 inches
(127mm) in diameter. Dust
extraction is critical when sanding.
The sander produces a lot of
sawdust that must be removed for
1
4
6 7
2
3
5
Parts of the Widebelt Sander