Laguna Tools MSANWB25X60-1K-7.5-0197, Manual

Page: 18 / 62

18
Clamp and spacer assembled
Belt sensor
Sanding belt assembled
Note. Never run the sander without the spacer and clamp assembled, as this will
damage the machine.
Note. The machine is supplied with a sanding belt, and this may not be the correct one
for your work. Purchase a number of belts to suit your work and always have spare
belts available; you can never predict when a belt will break or wear out.
Note. The sanding belt must be positioned centrally on the rollers. It must also be
between the forks of the belt sensor.
Choosing sandpaper
The grit type that you chose will depend on the type of work
that you are doing and the finish that the job dictates. It usually
saves time and results in a better finish if you start a job with a
coarse grit and then complete the finishing cuts with a fine grit.
This will entail changing the sanding belt but can save time in
the long run.
Grit Type
60 Coarse
80 to 100 Medium
120 to 150 Fine