Laguna Tools MSANWB25X60-1K-7.5-0197, Manual

Page: 36 / 62

36
Machine vibrates. Machine not level on the
floor. Re-level the machine,
ensuring that it has no
movement.
Broken, damaged or
defective sanding belt. Replace the sanding belt.
Loose fixing bolts. Check all the fixing bolts
and tighten if found
loose.
Respective noise. Damaged V belt(s). Replace V belt(s).
Motor fan hitting the cowl. Tighten the fan or the
cowl.
Part loose. Tighten loose part.
Conveyor belt worn. Replace conveyor belt.
Job slips when sanding. Greasy or dirty conveyor
belt. Clean conveyor belt.
Excessive depth of cut. Reduce depth of cut.
Conveyor belt worn. Replace conveyor belt.
Pressure roller not
exerting correct pressure
on job. Adjust pressure rollers.
Conveyor belt not
running in center. Conveyor belt not
tracked. Adjust conveyor belt.
Conveyor belt worn out. Replace conveyor belt.
Conveyor belt slipping. Incorrect pressure on
conveyor belt. Retention conveyor belt.
Depth of cut too big. Reduce depth of cut.
Conveyor belt dirty. Clean conveyor belt.
Conveyor belt
contaminated with
sawdust. Clean conveyor belt and
check dust extraction for
blockages.
Sanding belt hits ceramic
switch. Tracking out of
adjustment. Re-track the sanding belt.
Sanding belt will not track
correctly. Blocked tracking sensor. Clear sensor blockage.
Oscillation control valve
not adjusted correctly
(closed)
Adjust oscillation control
valve.