Lagler HUMMEL, Operation Maintenance Safety

Page: 5 / 48

5
INTRODUCTION
1.4 DANGER WARNINGS
Read through the danger warnings carefully and instruct your
employees or colleagues accordingly. Failure to comply with this
requirement could result in danger of injury.
In order to avoid injury caused by the sanding belt, the machine
may never be switched on when tilted backward.
Use only tools, accessories and spares intended for the HUMMEL
supplied by LÄGLER. No warranty cover exists for parts sourced
from other manufacturers! Use of other parts can result in dam-
age to the machine, to the floor you are sanding, or injury to the
machine operator.
Ensure that the dust bag is correctly attached in order to prevent
the unnecessary release of dust. This contaminates the environment
and constitutes a health hazard to operating personnel.
Incorrect transportation will result in damage to the equipment.
To avoid fire or explosive damage, always remove the dust bag
from the machine following sanding and empty the contents into
a non-combustible container! Seal this container with a non-
combustible cover and always store both the container and the
dust bag in the open!
Keep well away from sources of fire.
Do not smoke when there is dust in the atmosphere (e.g. while
working with the machine or emptying out the dust)
this could
cause a dust explosion.
The mains connection cable must be kept out of the work area in
order to prevent mechanical or electrical damage.
In order to prevent any chance of the machine being unintentionally
started up, the power supply must be cut off when the machine is
switched off by unplugging from the mains!
To protect the equipment against current faults, we advise using a
DI safety plug (Art. no. in Section 10 ).
When the unit is operated correctly, the prescribed dust limit values
are adhered to. When emptying the dust bag, we recommend wear-
ing respiratory protection mask P3 (Art. no. in Section 10 ).
1