Lagler HUMMEL, Operation Maintenance Safety

Page: 28 / 48

28
8
GENERAL SAFETY REMARKS
The machine is running well but creating dust
• The dust bag is over-full.
• The dust bag is not correctly mounted or damaged.
• The sealing felt is damaged.
• Check the suction system for blockages and clean if neces-
sary.
• The V-belt of the suction system is damaged or not sufficiently
tensioned.
• The side cover is not mounted at the machine.
SANDING ERRORS
Waviness, streaks, scratches
• The sanding drum or tensioning roller is damaged.
• Incorrect abrasive used.
• The wheels are soiled or damaged.
• Driving elements or V-belt damaged.
• The lowering rod linkage is running poorly, catching on some-
thing or getting stuck.
• The machine setting is incorrect.
• The operator is exerting the wrong sanding pressure.
• Incorrect work method or work not correctly performed.
General safety remarks
Never leave the filled dust bag unattended
To avoid fire or explosive damage, always remove the dust bag
from the machine following sanding and empty the contents into
a non-combustible container! Seal this container with a non-com-
bustible cover and always store both the container and the dust
bag in the open!
Keep the work area tidy
Untidiness in the work area results in a risk of accidents.
Be aware of environmental influences
Never leave the machine out in the rain. Do not use the machine in
humid or wet atmospheres. Ensure that good lighting is provided.
Never use the machine close to fire sources, combustible fluids
or gases.
8
ATTENTION!
When working with power tools and ma-
chines, the following fundamental safety
measures must be observed at all times in
order to protect against electric shocks and
danger of fire and injury. Read and observe
these instructions before using the machine.
Take good care of these safety instructions
and keep them to hand at all times!