Lagler HUMMEL, Operation Maintenance Safety

Page: 24 / 48

24
EXCHANGING THE LATERAL WHEELS
6.6.4 EXCHANGING THE LATERAL WHEELS
Use exclusively original LÄGLER lateral wheels (Art. no. in Section
10 ).
1 Switch off the machine and pull the plug out of the socket!
2 Tilt the machine back over the safety guard (Fig. 34). Ensure
that the machine is standing securely!
3 Release the screw in the centre of the wheel and remove the
screw and washers (Fig. 48).
4 Pull the wheel off the wheel lever.
5 Push the new wheel onto the wheel lever.
6 Mount the washers and the screw.
7 Tighten the screw again.
The lateral wheels must always be exchanged in pairs.
Fig. 49 Pull out the mains plug and open the belt guard.
Fig. 50 Release the V-belt tension by loosening the eye
bolt.
Fig. 51 Remove the suction V-belt.
Fig. 48 Remove the screw with the washers in the centre
of the wheel and remove the lateral wheel. Re-
place in reverse sequence.
Professional tip
As it is so easy and quick to exchange the lateral wheels and the back
wheel, it is advisable to use a second set of wheels when performing
rough work.
6