Lagler HUMMEL, Operation Maintenance Safety

Page: 7 / 48

7
Never use the sanding machine for any type
of wet operation!
When the machine is switched on, a se-
rious residual risk still remains despite
the presence of extensive safety devices.
Never reach into rotating tools and machine
parts!
TECHNICAL DATA
Intended applications
Sanding wooden and cork floors, plastic skating rings, with special
version also machining of sheet metal surfaces.
Basic equipment
Machine ready for operation, dust bag, MultiClip for dust bag fixture,
cable support, extension cable 3 x 2.5 sq. mm - 10 m long, O-ring as
a strain relief device, operating instructions and safety remarks,
tool kit complete with closed mouth wrench size 13/10, open-mouth
wrench size 17, hexagonal socket wrench size 6 and 5, setting gauge,
box wrench and respiratory protection mask P3.
Optional equipment
Carrying handle, TransCart, pocket for ear plugs, DI safety plug,
safety belt.
Wearing parts
To ensure that the machine works safely and to maximum effect,
please check the status of the wearing parts listed below at regular
intervals:
• Replace extension cable if damaged
• Replace motor cable if damaged
• Replace sealing felt if worn or damaged
• Replace MultiClip if damaged
• Replace V-belt if worn
• Replace sanding drum if worn or damaged (after daily use, ex-
change every 1 - 2 years)
• Replace the tensioning roller if worn or damaged (after daily use,
exchange every 1 - 2 years)
• Replace side cover if damaged
• Replace dust bag if worn or damaged
• Replace O-ring used as a strain relief if damaged
• Replace back wheel if worn or damaged
• Replace lateral wheels if worn or damaged
2
The relevant article numbers of the optional
accessories and wearing parts are provided
in the spare parts lists in
Section 10 .