LaCie Two Big eSATA & USB
User Manual
page
Plug the AC power adapter into the proper AC out-
let, connect the power cable to the power jack on
the back of the drive (fig. 3.1.2.A-1) and then turn
on the Two Big using the switch on the back (fig.
3.2.1.A-2).
Connect the Hi-Speed USB 2.0 cable into the Hi-
Speed USB 2.0 port on the back of the LaCie Hard
Drive (fig. 3.1.2.B).
Attach the other end of the interface cable to an
available USB port on your computer (fig. 3.1.2.B).
1.
2.
3.
TeChNICAl NOTe:
The LaCie Two Big
eSATA & USB default configuration is in FAST
(RAID 0) mode. To change the storage policy
configuration mode, see sections 3.2.
Storage Poli-
cies
, 3.3.
Changing the Storage Policy Configura-
tion
, and 7.
Understanding RAID and Storage
Policies
.
TeChNICAl NOTe:
If both a USB and an
eSATA cable are connected, the USB connection
will remain active and the eSATA connection will
be disabled.
Fig. 3.1.2.A.
3.1.2. Setup for Hi-Speed USB
■
1
2
Fig. 3.1.2.B.
SAfe
BIG
fAST
JBOD
mODe
Change
Setting up your LaCie Two Big
