LaCie Two Big eSATA & USB
User Manual
page
4. Maintaining Your LaCie Two Big
4.1. Removing/Replacing A Drive
In the event that an individual hard disk fails in the
LaCie Two Big eSATA & USB, please contact your
LaCie reseller or LaCie Customer Support
.
Please
replace a defective hard drive only by a new drive
provided by LaCie. For drive removal and replacement
process, please follow the steps below.
ImpOrTANT INfO:
After continuous use of
the LaCie Two Big eSATA & USB, drives may be
hot. Use caution when removing.
CAUTION:
Drive warranty will be void if you
replace the defective drive with a drive not pro-
vided by LaCie.
Remove the front panel by grasping the top corners,
lifting slightly and then pulling forward on the panel
removal tab.
Draw out the gray extraction handle by inserting your
finger into the ring and pulling gently (Fig. 4.1.A).
Grasp the hard drive.
Carefully extract the hard drive (Fig. 4.1.B).
1.
2.
3.
4.
Fig. 4.1.A.
Fig. 4.1.B.
4.2. Install New Firmware (Upgrade)
LaCie may periodically offer firmware updates for
the Two Big. Visit LaCie’s Web site,
www.lacie.com
,
for the latest firmware update. For the procedure, please
contact the LaCie technical support.
Maintaining Your LaCie Two Big
