LaCie 301160U - 1TB Ethernet Disk RAID Network Attached... User Manual Download

Page: 76 / 131

LaCie Ethernet Disk RAID

User Manual

page

Protecting Local Disks

4. On the first page of the installation wizard, click

Next

5. On the page with installation options, click

Next

(Initiator Service and Software Initiator are selected

by default.)

6. If a message box appears telling you to configure the

settings in the Control Panel, click

7. If you agree to the terms of the license agreement,

select I Agree and then click Next.

8. When the installation completes, click Finish. Af-

ter your computer restarts, you can install Windows

Backup Software.

TeChNICAl NOTe:

You do not have to con-

figure the Microsoft iSCSI Initiator. Windows

Backup Software will configure it for you auto-

matically.

7.1.4. Installing Windows Backup Software

■

You must install Windows Backup Software on

each computer whose local disks you want to protect.

A single license for the Ethernet Disk RAID is located

on the back of the unit. Additional licenses can be pur-

chased from http://www.intel.com/design/servers/stor-

age/offers.

To install Windows Backup Software

Log on as an administrator and insert the installation

CD into a CD-ROM drive.

Select

Applications

from the top menu.

Select the “

Windows Backup Software

” link to in-

stall the software.

Start the setup utility for Windows Backup Soft-

ware.

If the Microsoft* iSCSI Initiator 2.0 is already in-

stalled, go to the next step. If this component is not

currently installed, the prompt in Fig. 7.1.4.B ap-

pears.

Fig. 7.1.4.B

Summary of Contents for 301160U - 1TB Ethernet Disk RAID Network Attached...




































































































































Search results

Summary of Contents for 301160U - 1TB Ethernet Disk RAID Network Attached...

Reviews:

Related manuals for 301160U - 1TB Ethernet Disk RAID Network Attached...

Brands by name

Popular brands

LaCie 301160U - 1TB Ethernet Disk RAID Network Attached..., User Manual

Search results

Summary of Contents for 301160U - 1TB Ethernet Disk RAID Network Attached...

Reviews:

Related manuals for 301160U - 1TB Ethernet Disk RAID Network Attached...

Brands by name

Popular brands