Labrie EXPERT 2000 2002, Operator'S Manual

Page: 64 / 69

EXPERT 2000
64
LOADING PROCEDURE
• Stop the vehicle so that the arm is
lined up with the roller cart. The
distance between the roller cart and
the truck has to be from less than a
foot (30cm) to a maximum of 6 feet
(1.83m.);
• Press the trigger button on the
joystick lever to enable the hydraulic
power to the arm;
• Move the joystick towards the right
to extend the arm and reach the
roller cart (figure #3.46);
• To pick up the roller cart, push the
button on top of the joystick (figure
#3.45) to close the grabber.
• Pull the joystick towards you and
lift up the roller cart about 18 inches.
• Pull the joystick towards the left to
continue retracting the arm to the
end of its stroke and inside the
hopper;
• Pull the joystick towards you again
to unload the roller cart inside the
hopper (figure #3.49).
• Ensure that the roller cart is empty
before bringing it back in place.
• Bring the cart back in place, and
then open the grabber to release
the cart;
• Retract the arm on the side of the
truck until the next stop.
FIGURE #3.46
FIGURE #3.48
FIGURE #3.47
LIFT-UP
RETRACT
FIGURE #3.49
UNLOAD
EXTEND