Labrie EXPERT 2000 2002, Operator'S Manual

Page: 31 / 69

31
OPERATOR’S MANUAL
WARNING
In the case of a leak in the hydraulic system,
remove the drive shaft between the pump and
the engine, if the vehicle has to be driven
somewhere else.
IT IS VERY IMPORTANT NOT
TO LET THE PUMP RUN DRY
(WITHOUT OIL) OR TO TURN
THE BALL VALVE (FIGURE
#3.6) ON THE TANK EVEN IF
THE P.T.O. SWITCH IS TURNED
OFF. OTHERWISE THE PUMP
W I L L
B E S E R I O U S L Y
D A M A G E D O R E V E N
DESTROYED.
FIGURE #3.5
3.2 CONTROLS DESCRIPTION
3.2.1 ENGAGING THE PUMP
The pump system is engaged by the rocker
switch located on the console. A red pilot light
comes on to indicate that the hydraulic system
is engaged (Figure #3.5). It is important to
note that the pump system is a dry valve type,
consequently the pump is continually turning.
P.T.O.
SWITCH
RED LIGHT
BALL VALVE
FIGURE #3.6