Labrie EXPERT 2000 2002, Operator'S Manual

Page: 52 / 69

EXPERT 2000
52
DANGER
3.4.16 UNLOADING CORRECTIVE ACTIONS
As you are unloading the refuse unit some
garbage can fall or be blown between the
frame and the body. To remove this garbage,
that would prevent a proper lowering of the
body on the chassis, use safety prop (Figure
#3.31).
GARBAGE BETWEEN
FRAME AND BODY
• Release the body safety prop, raise
the body until props sit over their
supports and slowly lower the body
until the props are securely blocked
in their support;
• Proceed with the necessary
cleaning of the frame;
• Once finished, slightly raise body,
remove the safety prop and finish
lowering the body on the frame
before moving the vehicle;
AIR LOCK
MECHANISM
HOOK MECHANISM
INTERNAL SWING
DOOR
TAILGATE
SAFETY PROP
PROP
LOCK PIN
ALWAYS USE THE TAILGATE
S A F E T Y
P R O P W H E N
WORKING UNDER A RAISED
TAILGATE. PROP CAN BE
I N S T A L L E D E V E N I F T H E
TAILGATE IS IN THE FULLY
RAISED POSITION.
FIGURE #3.30
FIGURE #3.31