Labrie EXPERT 2000 2002, Operator'S Manual

Page: 37 / 69

37
OPERATOR’S MANUAL
TRUCK STARTING PROCEDURE:
• Put transmission shifter to
“ neutral ” ;
• Parking brake is “ On ” ;
• Hydraulic system is “ Off ” ;
• Start engine;
• Engage the hydraulic system using
the PTO switch on the console(the
air pressure has to be at a minimum
of 90 PSI);
• Turn on all lights, (marker lights,
headlights and work lights);
• If required, move the truck to an
appropriate area to perform the start
of the day inspection. Use the
driver
’ s side;
• Report any defective system to
maintenance personnel.
3.3 DAILY INSPECTION
3.3.1 APPROACHING THE VEHICLE
As you approach the vehicle, look for any
object that the wind could have pushed under
or against it. Examine the surroundings for
people, other vehicles, under and overhead
obstructions. Ensure that the truck is in an
area where you will have all the clearance
required to perform the complete start of the
day inspection. During the following
inspection look out for any structural damage.
3.3.2 TRUCK STARTING PROCEDURE
Enter the cab and proceed as per the truck
manufacturer
’ s start up procedures.
FIGURE #3.13
CHUTE CONTROL
PANIC BAR
CART TIPPER CONTROL