Labrie EXPERT 2000 2002, Operator'S Manual

Page: 38 / 69

EXPERT 2000
38
3.3.3 BODY INSPECTION PROCEDURE
Exit the cab to continue your inspection. Bring
a rag along to clean all accessible lights,
stickers, camera lens etc. Check for mechanical
problems: rollers, hinges, door lock
mechanisms, wear items etc. Report any
defective system to maintenance personnel.
RIGHT-HAND CAB DRIVING
CONTROLS INSPECTION
PROCEDURE
• Test the driving wheel by turning it
left and right as you are moving
slowly the truck forward;
• Move forward and stop the vehicle
by applying the foot brake;
• Apply the parking brake and try to
get the vehicle moving by throttling
up with the right-hand side
accelerator pedal. Throttle down to
idle, apply foot brake and remove
parking brake;
• Apply the temporary handbrake (if
installed) and test it the same way
you tested the parking brake;
• Apply the parking brake.
DAILY INSPECTION
PROCEDURE
• Operate the packer for a full cycle;
• Check crusher panel operation;
• Check cart tipper operation(if
installed);
• Check the side hopper door for
proper latching at the front and rear;
• Put the tailgate safety pins in place
• As you walk along the side, clean all
safety labels;
• Check the frame area, fuel tank, air
tanks (air tanks must be drained
every day), cleaning traps and
wheels for leaks, cracks or other
types of problems;
• Go around the front, check lights,
mirrors, and pump;
• Go around the rear, check lights,
clean camera, labels, lights etc....
3.3.4 CAB DRIVING CONTROLS
INSPECTION PROCEDURE
Enter the right-hand side extension and operate
the right-hand side driving controls: Report
any defective system to maintenance personnel.