MSD 7R SHEARS
Maintenance
Section 5 Page 23
RECOMMENDED SPARE PARTS LIST
The following is a description of the parts Stanley LaBounty recommends to have on hand for these benefi ts.
1.
Less downtime for lack of a part.
2.
Original equipment manufacturer parts are inspected to Stanley LaBounty standards for proper fi t and func-
tion.
3.
Eliminate the possibility of a part being unavailable for immediate delivery.
4.
Eliminate overnight air freight costs.
5.
The accessibility of replacement parts assures the proper shear maintenance will be followed and therefore
increase the effi ciency of the shear.
BLADE ASSEMBLY
Cutting blades
Guide blade
All bolts and washers used to fasten blades
Blade shims for lower shear blades (not supplied with
new blades)
HYDRAULIC ASSEMBLY
All hydraulic hoses
O-ring face seal adapters (ORS)
CYLINDER ASSEMBLY
Cylinder seal kit (ordered by cylinder part number
and serial number)
ROTATION ASSEMBLY (IF EQUIPPED)
Crossover relief or motion control valve
(one is applicable to each rotation assembly)
MANIFOLD ASSEMBLY (IF EQUIPPED)
O-ring seals
Rotary seals
Your warranty could be compromised by using parts
other than original LaBounty parts.
Do not substitute parts unless you know they are the
same in ALL characteristics.
Refer to the shear parts catalog for specifi c part
numbers. Be sure to reference the attachment serial
number.
NOTICE
NOTICE
NOTICE
