Rev. May 2001
GraviMaster-FGB-M05 (S)
Page 35
Gravimetric
Blender
PROTECTED PARAMETERS
Parameter Description
Init
BatchWeight
Total weight of one batch. This value is copied into 0,5 [kg]
every recipe when it is created.
DispenseTry
Maximum number of tries per component to reach 4
maximum
accuracy
DispenseAccuracy
Minimum accuracy for each component.
25 [%]
DispenseRate
Maximum deviation when a re-calculation of the
30 [%]
CorrectionBand
dispense-speed is done
SiloPresent Indicates
the
‘Stock-Silo’ regrind control process
No
is
activated.
MaximumTare
Maximum absolute deviation from the zeropoint
40 [g]
Variation
of the weighbin.
SiloHighCount
Number of batches with the highness activated
100
before the controller initiates an alarm.
SiloLowCount
Number of batches with the lowsensor not activated 100
before the controller initiates an alarm.
EmptyRegrind Indicates
the
‘Empty Regrind’ regrind control
No
process is activated.
EmptyRegrindHopper Indicates the hopper which is used in the empty
Hopper 1
regrind
process
EmptyRegrindCycles Number of batches empty regrind waits before
1
increasing regrind (startprocess)
Dispense inc/dec
Maximum percentage for the regrind control
10 [%]
processes
Dispense
Number of steps in whitch the maximum must
10
VariationCycles be
reached.
LoadcellGain Amplifi cation-factor for the loadcell signal
16
LoadcellOverload
Maximum weight in the weighbin. The controller
800 [g]
initiates an error on this point.
LoadcellSettleTime
Time between the dispense of the last component
1 [s]
and reading the weigbin-signal.
(to eliminate vibrations).
LoadcellWeight
To read a correct weight 8 samples must fi t to this
10 [g]
BandWidth absolute
band.
FGB-Name/Nr.
Name of the controller; This name is used in the
user-interface of the terminal.
Summary of Contents for FGB-M05
