© 2018 Corning Incorporated
38
Screen messages
End of centrifuging – manual mode
Centrifuging may be stopped at any moment
via the STOP key. The information message:
CYCLE CANCELLED will be displayed.
End of centrifuging – manual mode
Stopping centrifuging in accordance the set
time causes generating multi-tone audible
signals (after stopping the rotor) and
displaying the message
FINISH OF CENTRIFUGING
Additional messages
In case of power shortage while centrifuging,
after repeated switching it on, the following
error screen will be displayed:
SUPPLY DECAY WHILE CENTRIFUGING
After operating for 2000 hours, after every
switching on the centrifuge the error screen is
being displayed with information about the
necessity to carry out servicing activities.
After pressing the SET key, the device
proceeds to the main screen and the device
may operate.
Identified number of the installed rotor is not
compatible with the number of rotor
remembered in program.
