© 2018 Corning Incorporated
30
FAST COOL mode is marked by symbol
blinking in the right upper side of
display.
ATTENTION -to use FASTCOOL mode set
temperature must be lower than current
temperature shown by centrifuge. When set
temperature is higher, ! symbol is visible and
accoustic signal is emmited.
It is possible to exit FAST COOL mode at any
time by pressing STOP key.
Interruption of the function is signaled by a
message.
Initial cooling without centrifuging – THERMAL CHAMBER
PARA THERMAL CHAMBER
There is a possibility of cooling chamber without centrifuging.
Way of activate THERMAL CHAMBER is described in chapter “Parameters
of centrifugation/Thermal chamber”.
Cooling in “START DELAY – OF TEMPERATURE” mode
PARA START DELAY/OF TEMPERATURE
Centrifuging with set parameters process will start, when preselected temperature
is reached.
How to enable run START DELAY – OF TEMPERATURE function is described in
Parameters of centrifugation chapter.
