LM1510 Servo Drive Label Applicator
US
ER’S MANUAL
Page
53
Made in the U.S.A.
© 2019 LabelMill
11/01/2019 Model LM1510
DESCRIPTION OF I/O
All user inputs and outputs are
“SINKING”
type, except for the special isolated ground I/O. Example in order for a
status light to illuminate for “Run Status Ok” the light should be wired between pins #1 & #8 on the
“Light
Bar/Aux.”
Connector. (Note: some outputs can be wired to sourcing type outputs)
Status display legend.
INPUTS
OUTPUTS
S
P
H
A
F
V
T
SMART
TAMP
PRODUCT
SENSOR
TAMP
SENSOR
AIR ASSIST
SOL
FLAG
SOL
VACUUM
SOL
TAMP
SOL
When using the I/O status ports to verify if the inputs and outputs are on or off, the ports are numbered as from
right to left follows are as shown below: In this sample port Y2:0 , Y2:1 , Y2:3 , Y2:5 ,and Y2:7 are on.
I/O STATUS
>PORT Y1
PORT Y1
0 0 0 0 0 0 0 0
PORT Y2
0 0 0 0 0 0 0 0
I/O STATUS
>PORT Y2
PORT Y2
7 6 5 4 3 2 1 0
x o x o x o x x
4-33
