LM1510 Servo Drive Label Applicator
USER’S MANUAL
Page
10
Made in the U.S.A.
© 2019 LabelMill
11/01/2019 Model LM1510
LABEL SENSOR ADJUSTMENT
(Synchronous Feed Configuration Shown)
Manual adjustment of the label in relation to the peeler plate is achieved by loosening the thumbscrew on the
backside of the label sensor and sliding the assembly up or down on the peeler arm rail.
Once the label sensor is manually adjusted, trigger the applicator to test the position of the label in relation to the
peeler plate.
After the “rough” adjustment is made, refer to page 4-14 for label sensor fine adjustments.
2-3
Label
Sensor
Peeler Arm
Rail
