Lab companion IL3-15, Operation Manual

Page: 9 / 56

３
Manual NO. 220412L002 Version : 0.0
1.2.1 General Liability
In any case, safety is the first priority. The owner of the machine, user, and/or
maintenance personnel must be fully aware of the safety which is the most important
part of our everyday business.
If you are concern about the loss in efficiency, remember that accidental impact is
always negative for the effectiveness of covering human resources and property.
Effective safety program is the most obvious way of increasing efficiency and productivity.
Ensuring and maintaining the safety of the equipment by checking it daily in addition to
the regular maintenance of the unit is a shortcut to improving the productivity.
The users must read this manual describing the functions and safety points of each part
as a guided for safe operation.
1.2.2 Responsibility of the users
Users are most well- known for the machine's performance and the limit because they
are the ones running the machine most of the time.
The safety of the user's maybe be easily be forgotten by the needs of efficiency or
familiarity of using the device for a long time.
Precautions with regards to safety in the manual, or by other displayed safety
information do not protect the users from injury while they are using the device.
Always read the safety instructions and run the unit safely. In addition, the potential for
dangerous situations always should be reported immediately to colleagues and
superiors.
< Things to read >
• Do not touch any part of the body to the dangerous part of the device.
• Check the voltage, phase and capacity of the power supply and connect properly.
• Do not operate or service, adjust the device until you receive adequate training or are fully
aware of the capabilities of the device.
• Remove unnecessary things, sample, or chemicals from this unit.
• When the unit does not operate normally or are neglected from use for a long time check
all the settings before operating the equipment.
• Make sure that the unit is operating normally when you move the equipment, or re-use
after a long period.
• Stop operating immediately and report to the managers when you find the following states;
- Unsafe operation and status
- Shorts
- Improper maintenance
• When you operating the machine, do not wear loose clothing or jewelry, tie long hair or
use hair cap.
• Always keep the equipment clean and peripheral areas, and check if there is a problem
with the product or for missing parts.