Lab companion IL3-15, Operation Manual

Page: 30 / 56

２４
©2016. All Rights Reserved. Jeio Tech Co., Ltd
If no input in the knob for 20seconds, the setting will be canceled.
(3) Push the Knob to save the adjusted setting.
※
In case of Timer setting, the procedure is the same as above.
※
In case of Menu configuration, Push Menu button while selecting the setting and change the setting
as above.
※
Fixed Temp Load Function: Push Dial Knob for 3seconds, you can bring the fixed temperature set.
When you need to cancel the setting while you are in configuration, press MENU button to cancel.
(Press TIMER button in case of Timer setting.)
When you press MENU button you can go back to previous step and you will go back to
main
설
display when you are in MENU select display.
4.3.3 Controller Lock
When the unit is running, Press the MENU button for 3seconds to activate/deactivate controller
lock.
When the Controller Lock is activated, you cannot use whole buttons on the controller except for
RUN/STOP button.
4.4 TIMER Function
There are 2kinds of TIMER function in the unit.
Wait On Timer: After setting time passed, the unit starts running.
Wait Off Timer: After setting time passed, the unit stops running.
Press TIMER button to enter timer setting menu. When the timer is set, “TIMER”is displayed on the
left below side of VFD. You can adjust the timer max. to 999h 59m.
4.4.1 TIMER ON setting
(1) Press TIMER button once. you can see the current TIMER setting.