Lab companion IL3-15, Operation Manual

Page: 14 / 56

８
©2016. All Rights Reserved. Jeio Tech Co., Ltd
1.5.1 Warning statements
Indicates a hazardous situation which, if not
avoided, could result in death or serious injury
Observe all warning labels.
DO NOT remove warning labels.
Check the voltage, phase and capacity of the power supply and connect properly.
Power supply must be properly grounded.
: Abnormal grounded connection causes serious damage. Grounded connection must not be
on the water pipe and gas pipe.
Do not insert multiple plugs into the outlet at the same time.
: In case of over current, possible to cable burning, product damage, and fire.
DO NOT operate equipment with damaged line cords.
DO NOT handle or touch electrical cord and electrical parts with wet hands.
DO NOT move the product during operation.
DO NOT use the machine near environments where explosion can occur due to organic
evaporating gases.
Do not install the product near environments where flammable gas may leak.
Do not use the machine at places where moisture is high and flooding can be happened.
Do not install the product near gas pipe or water pipe.
Do not use the machine near environments where explosion can occur due to organic
evaporating gases.
DO NOT use product in environments that contain industrial oil smoke and metallic dust.
Do not install the oven near high- frequency machine. (High-frequency welder, High-frequency
sewing machine, large capacity SCR control)
Do not put explosive and flammable chemicals (Alcohol, Benzene, and etc.) into
the chamber.
Do not put any liquid container on product. In case of liquid leaking, the liquid is caused product
damage.
Do not expose the product to direct sunlight
Do not expose the product to direct heat sources.
DO NOT let moisture, organic solvents, dust, and corrosive gas enter the control panel.
DO NOT operate the Product when there is strange sound, smell and smoke coming from the
unit.