Lab companion IL3-15, Operation Manual

Page: 23 / 56

１７
Manual NO. 220412L002 Version : 0.0
3.2 Environmental setting
The unit can be operated properly under the following environmental conditions for a long time
running without any problem.
No direct sunlight.
Keep product away from high frequency noise produced by equipment
and/or machinery, such as electrical distribution panels, welders,
induction heating mechanism, and large amounts of SCR (Silicon-
controlled rectifiers).
Please keep Ambient temperature 5
℃
~40
℃
Relative humidity not to exceed 80%
Altitude not to exceed 2000m (6,562 feet)
Check a ground wire of the unit.
3.3 Preparing before installation
(1) This product is designed to operate normally on specified power source.
Before installing the product, make sure the suppling power is matched the using power. (refer. ID
plate which is located product back side)
The power source must be a grounded more than grand 2. Also the power code must be have
ground terminal this product is designed to operate normally on specified power source. Before
installing the product, make sure the suppling power to match using power. (refer. ID plate which is
located product back side)
(2) When you transport the product, should be using correct tool and more than one person.
(3) The outlet should be installed near the product to use easily.
(4) Install the product on the flat, level surface which is no vibration and shock-free place.