16
MUM S11BRIO REV0
1
HOT WATER DELIVERY FOR INFUSIONS:
With the steam boiler ON and pressurised (approximately 1 - 1.2 bars, as shown on the main Display), position a frothing jug underneath the hot
water delivery spout 7 (PAGE 3).
Press the hot water delivery button 8 (PAGE 5). Hot water delivery will begin.
When the desired amount has been delivered, press button 8 again (PAGE 5) to stop delivery.
PLEASE NOTE:
Do not press button 8 (PAGE 5) before placing a frothing jug below the hot water delivery spout 7 (PAGE 3), to avoid being burnt.
PLEASE NOTE:
If the machine has been idle for more than an hour, draw off approx. 200 cc empty before delivering.
ACCESSING THE APPLIANCE PROGRAMMING/SETTINGS MENUS:
To access the appliance settings/parameters menu, proceed as follows:
With the appliance ON, press the
button on the Touch Display for more than a second and the following will appear on the Display:
Enter the 4-digit PIN to access the menus (DEFAULT PIN: 0000) and confirm by pressing the button
.
Summary of Contents for S11 BRIO
Page 3: ...3 GENERAL DESCRIPTION OF THE MACHINE 1 2 3 4 8 7 9 10 11 12 6 5...
Page 5: ...5 MUM S11BRIO REV01 GENERAL DESCRIPTION OF THE CONTROL PANEL 1 2 3 4 5 6 7 8 9 10 11 12 13 14...
Page 18: ...18 MUM S11BRIO REV01 PARAMETERS MENU By selecting the button the following will be displayed...