![background image](http://html1.mh-extra.com/html/la-spaziale/s11-brio/s11-brio_instructions-for-use-and-maintenance-manual_3149072011.webp)
11
MUM S11BRIO REV0
1
INSTALLATION
The electrical system, water system and drainage system (if present) MUST already be fitted by the Client in
a suitable position to enable correct installation. The installer can modify the existing system prepared
by the Client see the "Preparation for user installation" paragraph.
The appliance must be installed somewhere so that use and maintenance is limited to trained staff only.
• The appliance is not designed to be built-in.
• After removing the packaging, check the condition of the appliance. If any doubts arise, do not use it and contact the manufacturer directly.
Packaging materials must not be left in the reach of children as they are a potential hazard. Lift the appliance up by its sides and set it down on a
secure support surface.
• The appliance must be installed so that the plug which disconnects the appliance from the electrical mains is still accessible.
• Installation must be carried out in areas where use and maintenance is restricted to trained staff only.
Before plugging the appliance into the mains socket, check that data plate details are the same as those for the installation site.
REMOVAL OF PACKAGING
• After removing the packaging, check the condition of the appliance. If any doubts arise, do not use it and contact the manufacturer.
Packaging materials must not be left in the reach of children as they are a potential hazard.
Please Note!
The appliance weighs more than 30 Kg and as such must be moved by more than one person.
N.B.!
Dispose of packaging elements in accordance with relative laws and regulations in force in the country of machine use.
Summary of Contents for S11 BRIO
Page 3: ...3 GENERAL DESCRIPTION OF THE MACHINE 1 2 3 4 8 7 9 10 11 12 6 5...
Page 5: ...5 MUM S11BRIO REV01 GENERAL DESCRIPTION OF THE CONTROL PANEL 1 2 3 4 5 6 7 8 9 10 11 12 13 14...
Page 18: ...18 MUM S11BRIO REV01 PARAMETERS MENU By selecting the button the following will be displayed...