La Marzocco GB5 X Series Manual Download Page 59

Page: 59 / 160

Display

Operating Procedure

Description

“Barista” Programming

Backflush

INDIVIDUAL

Backflush

Group Dose

Settings

• This parameter allows the operator

to carry out the washing of the coffee
groups, in an automatic way, by running
multiple cleaning cycles.

• This espresso machine has a group

rinsing function (rinsing jets) integrated
in the electronics.

• The rinsing procedure is provided to give

the operator more flexibility and freedom
with regard to this operation.

•

Do not perform the cleaning procedure

when other groups are dispensing
coffee.

• The operator can choose between

single-group rinsing mode and all-group
rinsing mode, the latter by activating all
groups together.

Press T1 or T2 to continue with the programming of the other parameters.

94.4 00:00

95.5 95.1 SB

Press T2 and T3 at the same time to exit the programming mode and return to the normal use of the espresso

machine.

Summary of Contents for GB5 X Series

































































































































































Search results

Summary of Contents for GB5 X Series

Reviews:

Related manuals for GB5 X Series

Brands by name

Popular brands

La Marzocco GB5 X Series, Manual

Search results

Summary of Contents for GB5 X Series

Reviews:

Related manuals for GB5 X Series

Brands by name

Popular brands