La Marzocco GB5 X Series Manual Download Page 104

Page: 104 / 160

104

Display

Operating Procedure

Description

“Technical” Programming

Water Dose

• This parameter allows the operator to

program the amount of water (brewing
amount) for the hot water button.

• This feature can be enabled or disabled.

Enter Password

******

Water Dose

Settings

Program

Water Dose

Desired dose can be programmed using hot water button. Press the T3 button to start dose programming
procedure.

Program

Water Dose

Press Water Button

To Stop

Press Water Button

To Program

Water Dose Saved

5.0 Seconds

To program the brewing time, press the hot water button to start and then press it again to stop when the
desired dose is achieved.
Now the saved brewing time is displayed.

G1 Water Dose

5.0s

Press

or T2 to display the dose of the hot water button. Pressing the button T3 button, the dose value will

blink. Use the button

or T2 to change the value, press the button T3 button to confirm the desired value.

Summary of Contents for GB5 X Series

































































































































































Search results

Summary of Contents for GB5 X Series

Reviews:

Related manuals for GB5 X Series

Brands by name

Popular brands

La Marzocco GB5 X Series, Manual

Search results

Summary of Contents for GB5 X Series

Reviews:

Related manuals for GB5 X Series

Brands by name

Popular brands