EN
58
Display
Operating Procedure
Description
“Barista” Programming
5
When activated, the water pump comes into operation, and the electric valve of the specific group being
washed will turn on and off the cycle. There are about 10 preset cycles with an interval of 4 seconds. To
manually stop the rinsing, press any key.
6
NOTE:
In order to properly rinse the groups, put a small amount of detergent in a blank portafilter basket and
insert it in the group to be rinsed before activating the rinsing process.
Group Dose
Exit
7
Press T1 or T2 until the display shows the exit menu, press the T3 button to return to the “Barista” programming.
MOST DETERGENTS CAUSE FOAMING DURING THE CLEANING PROCESS. THIS FOAM COLLECTS AT THE DRAIN
BOX AND CAN PROHIBIT WASTE WATER FROM DRAINING PROPERLY.
RINSING MULTIPLE GROUPS SIMULTANEOUSLY COULD CAUSE THE DRAIN BOX TO OVERFLOW.
WARNING
Backflush
INDIVIDUAL
Backflush
Group Dose
Settings
• This parameter allows the operator
to carry out the washing of the coffee
groups, in an automatic way, by running
multiple cleaning cycles.
• This espresso machine has a group
rinsing function (rinsing jets) integrated
in the electronics.
• The rinsing procedure is provided to give
the operator more flexibility and freedom
with regard to this operation.
•
Do not perform the cleaning procedure
when other groups are dispensing
coffee.
• The operator can choose between single-
group rinsing mode and all-group rinsing
mode, the latter by activating all groups
together.
