LA Fitness R8, Owner'S Manual

Page: 7 / 16

6
Console Instructions
BC-8186
A. Power up:
a. Connect all of the cables to the monitor.
b. After power up, all LCD segments will light up for 2 seconds and CPU will be reset
the resistance into level 1. The monitor will go to initial mode.
1. If the connection cables were installed incorrectly, monitor will display “E1” on matrix
display and generate a beep sound. Before asking service, please examine if all
connection cables are well connected and then reset the power to release the beep
sound or press “START / PAUSE (Hold to reset) “button to restart system. If the monitor
still show “E1” message, please call service.
2. If the monitor shows “E2”message, please call service.
B. KEY BOARD:
a. ENTER:
1. During PAUSE mode, press “ENTER” key to enter desired program.
2. Confirm the setting values of TIME, COUNT, DISTANCE, CALORIES, PULSE in
the heart rate control program 8, and PROGRAM PROFILE in the User setting
program.
b. START/PAUSE/ RESET:
1. To start or pause exercising.
2. Hold this button for 2 seconds can enter initial mode & reset all value to zero.
c. ▲ :
1. During the pause mode, Select Program or increase the setting value of TIME,
COUNT, DISTANCE, CALORIES, PULSE in the heart rate control program 8 and
PROGRAM PROFILE in the User setting program.
2. During the exercise mode, Press this button to increase the load level.