La Cornue CornuFe, Service Instructions Manual

Page: 21 / 36

21
SERVICING  WARNING  WORK SAFELY
Where necessary disconnect from electricity and gas before starting.
Check range is safe when you have finished.
15 To Remove a Cooktop Burner Spark Electrode
Remove the cooktop grate and burner head. Undo the large
brass nut and remove the brass venturi.
Lift up the burner bezel. The spark ignition wire will be pulled
through the electrode clearance hole. Disconnect the spark
electrode from the ignition wire.
Note
Take care to prevent the ignition wire from falling back through
the clearance hole.
Undo the spark electrode from the bezel by removing the spring
clip and spring. Fit the replacement electrode to the burner
bezel. Ensure that the spring and clip are properly located.
Replace in reverse order and check correct burner ignition.
16 To Remove a Cooktop Burner Body
Remove the cooktop grates, cooktop accessories and
burner heads. Remove the cooktop as detailed in
Section 1.
Remove the nut that secures the burner body to the
support channel. Remove the fi xings that secure the
support channel to the chassis. Lift the channel clear of
the range.
Undo the compression fi tting which connects the
burner body to the gas pipe. Remove the burner body
from the range. Remove the orifi ce for the old burner
and fi t it to the new burner body.
Replace in reverse order. Check the range is gas sound
and that the burner operates satisfactorily.