manualshive.com logo in svg

La Cornue CornuFe, Service Instructions Manual

Share
Download
La Cornue CornuFe Service Instructions Manual Download Page 2

WARNING

If the information in this manual is not followed exactly, a fi re or explosion 
may result causing property damage, personal injury or death.

Do not store or use gasoline or other fl ammable vapors and liquids in the 
vicinity of this or any other range.

WHAT TO DO IF YOU SMELL GAS
Do not try to light any range.
Do not touch any electrical switch
Do not use any phone in your building.
Immediately call your gas supplier from a neighbor’s phone. Follow the gas 
supplier’s instructions.
If you cannot reach your gas supplier, call the fi re department.

Installation and service must be performed by a qualifi ed installer, service 
agency or the gas supplier.

WARNING

The anti-tip device supplied with this range must be correctly fi tted when the range is installed. 
This will reduce risk of tipping of the range from abnormal usage or by excessive loading of the 
oven door

  

WARNING

•  ALL RANGES CAN TIP
•  INJURY TO PERSONS COULD RESULT
•  INSTALL ANTI-TIP BRACKET PACKED WITH RANGE 
•  SEE INSTALLATION INSTRUCTIONS

Summary of Contents for CornuFe





































Reviews:

No comments

Brands by name

Popular brands

Load more brands