La Cornue CornuFe, Service Instructions Manual

Page: 18 / 36

18
SERVICING  WARNING  WORK SAFELY
Where necessary disconnect from electricity and gas before starting.
Check range is safe when you have finished.
Left Hand Multifunction oven
From inside the oven remove the two screws holding the
thermostat phial to the oven fan cover at the rear of the
oven.
Feed the thermostat capillary out of and clear of the oven
noting the routing.
Disconnect the wires from the thermostat and undo the
two fi xings which secure the control to the mounting
plate.
Fit the replacement and re-assemble in reverse order.
Ensure that the phial is clipped to the oven rear,
positioned centrally between the clips.
Check that the thermostat functions correctly
9 To Change a Multifunction oven function switch
Move the range away from the wall - see ‘How To Move the Range for Servicing’.
Remove the cooktop grates, cooktop accessories and burner heads. Undo the large brass nuts and remove the
brass venturis and washers. Lift up the front of the cooktop top and prop it up.
Remove the control panel see section 2.
Remove the fi xing screws from the front of the Multifunction oven function switch, disconnect the leads and
remove the switch. Fit the new switch.
Reassemble in reverse order and check that the oven operates correctly.
10 To Remove an Oven element Thermal Cut-Out.
Note
There is one thermal cutout on the fan oven, 2 on the
Multifunction oven.
Pull the range forward to gain access rear, see the section
‘How To Move the Range for Servicing’.
Undo the rear cover screws and lift cover clear.
There is one thermal cutout on the fan oven and 2 on the
Multifunction oven.
The cutouts are located on the earth plates beside the
oven element connections. Disconnect the cutout wiring.
Undo the fi xings that secure the cutout to the earth plate
and remove.
Fit replacement control and re-assemble in reverse order.
Back of Multifunction oven