17
SERVICING WARNING WORK SAFELY
Where necessary disconnect from electricity and gas before starting.
Check range is safe when you have finished.
7 To Change Oven Light Switch
Remove control panel (see 2).
NB The old switch may be destroyed during removal.
Remove switch button and old switch from its bezel by gripping the switch body
behind the control panel and twisting sharply. The switch bezel can then be removed
by folding back its locking wings and pushing forward. Fit the new bezel to the control
panel by fi rst lining up the raised key on its body with the cutout in the control panel
and pushing it in from the front. Assemble the new switch to the bezel by lining up the
key sections and pushing home. Fit the new button by pushing in from the front.
Replace control panel in reverse order and test for correct operation.
8. To Remove a Thermostat
Remove the cooktop - see 1.
Remove the control panel - see 2
Remove the oven shelves.
Undo the range rear cover screws and lift covers clear.
Right Hand oven
From inside the oven remove the two fi xings that secure
the thermostat phial cover. Unclip the thermostat phial
from the clips in the oven back panel.
Feed the thermostat capillary out of and clear of the
oven noting the routing.
Disconnect the wires from the thermostat.
The thermostat is clipped onto the front switch. Pull the
thermostat away from the front switch.
Fit the replacement and re-assemble in reverse order.
Ensure that the phial is clipped to the oven rear,
positioned centrally between the clips.
Check that the thermostat functions correctly.
Summary of Contents for CornuFe
