La Cornue CornuFe, Service Instructions Manual

Page: 26 / 36

26
SERVICING  WARNING  WORK SAFELY
Where necessary disconnect from electricity and gas before starting.
Check range is safe when you have finished.
24 To Remove the Cooktop Spark Generator
Pull the range forward to access the covers at the rear of the range; see
the section ‘How To Move the Range for Servicing’.
From the rear remove the right hand (when viewed from the rear) rear
cover and disconnect all the leads at the generator. Fit the leads to the
new generator
Undo the fi xings that secure the spark generator and remove the device
and fi t the new one.
Re-assemble in reverse order.
Check that the ignition works correctly
25 To Remove the Cooktop Electrode Leads
Pull the range forward to access the covers at the rear of the range, see the section ‘How To Move the Range for
Servicing’.
Remove the cooktop grates, cooktop accessories and burner heads.
Lift up the front of the cooktop top and prop it up.
From the rear remove the right hand (when viewed from the rear) rear cover and disconnect all ignition electrode
leads at the generator.
Disconnect the leads at the electrodes. Pull the bundle of electrode HT leads up through the rear upright.
Place the new leads in the rear upright. Re-connect the leads at the generator and burner electrodes.
Re-assemble in reverse order and check ignition.
26 To Remove Oven Inner Back
Open the oven door. For the left hand oven unscrew the 2
thermostat phial fi xing screws.
Remove the fi xings that secure the inner back to the oven
rear. Lift the removable panel away.
Re-assemble in reverse order. Ensure that the retaining fi xings
are fully tightened.