Chapter 2 - Operator Payload Menu
TM00358 Rev. A
October 2007
L-3 WESCAM
42
All Rights Reserved
2.11 OPERATOR PAYLOAD MENU
The Operator Payload menu provides controls to:
•
Configure the sensitivity of lens zoom, focus and filter controls
•
Set the initial zoom point and default filter for the lens
To customize control sensitivity of the Hand Controller, operators can alter the drive action for the cameras to either
increase or decrease the input needed to zoom or focus the lens. For example, operators might decrease the focus
gain to achieve finer focus control. For sensors with zoom capable lenses, operators might increase the zoom gain
to speed up focal length changes. Gain setting can be set to a minimum factor of zero, which essentially disables
movement or the ability to zoom or focus the lens.
Figure 2-28 Level 2 Operator Payload Menu
Table 2-12 Status Information and Controls in the Level 2 Operator Payload Menu
Field
Values
Description
VALUE FIELDS
ZOOM SENSE
NORM
Sets the direction of zoom travel on the user control:
• Upward pressure on ZOOM switch increases zoom.
• Downward pressure on ZOOM switch decreases zoom.
REV
Reverse the normal zoom directions.
ZOOM GAIN
0 to 100
Sets the responsiveness of the ZOOM switch to zoom travel speed.
FOCUS GAIN
0 to 100
Sets the responsiveness of the Focus dial to refine focus adjustments.
NEAR FOCUS
1 to 500
Sets the degree of focus adjustment to have greater precision at one end of the focal range:
• Small values have more focus adjustment for close subjects.
• Large values have more focus adjustment for far subject.
INIT FILTER COL
LEVEL 2 - OPERATOR PAYLOAD
ALL ZOOM SENSE NORM
DONE
FACTORY DFLT
IR INIT ZOOM 200
FOCUS GAIN 10
NEAR FOCUS 5
EON FOCUS GAIN 10
NEAR FOCUS 100
EOW ZOOM GAIN 10
FOCUS GAIN 20
NEAR FOCUS 2
INIT FILTER LP
