L3 Communications MX-15i Operation & Maintenance Manual Download Page 27

Page: 27 / 132

TM00358 Rev. A

Chapter 2 - Hand Controller Controls

L-3 WESCAM

October 2007

Table 2-1 Hand Controller Primary Switch Controls

Item

Control

Description

SWITCHES AND CONTROLS

(1)

ZOOM switch

Sensor:

• For the Video-In-Control (VIC), click up to zoom-in on the video image.
• For the VIC, click down to zoom-out of the video image.

Menu:

• When in a user menu, click up or down to navigate one step in the menu

options.

• When in a user menu, hold up or down to scroll through the menu options.

Note: The VIC’s sensor must have zoom capability.

Note: For sensors with a stepped zoom, click once and allow switch to return

to its neutral position.

(2)

VIC switch

• Click up to change the Video-In-Control (VIC) to another sensor view.

Note: The VIC is the sensor that is affected by all common controls, e.g.

zoom and focus.

(3)

*AVT GATE switch

• Click up to select an AVT gate size.

Note: The AVT button must also be pressed and held when selecting gate

size.

*AVT MODE switch

• Click down to select an AVT tracking algorithm.

(4)

*AUTO switch

• Click up to enable an Auto (Geo Position) steering mode.

MANUAL switch

• Click down to enable a Rate (Manual) steering mode.

Note: Excluding Stow, this selection will cancel all other disabled, assisted or

automated steering modes.

(5)

AID switch

• When operating in a Rate (Manual) steering mode, click up to enable a

Rate-Aid steering mode.

• When operating in an Auto steering mode, click up to enable an Auto-Aid

steering mode.

ZMULTI switch

• Click down to enable or disable the slew transducer’s automated steering

sensitivity adjustment.

Note: For the Video-In-Control, turret steering will speed or slow to

compensate for focal length changes. Unzoomed viewing will steer
quickly while zoomed viewing will be less responsive.

(6)

SLEW switch

• Click up to have the turret steered to a position supplied by a radar, moving

map system, or other external data sources.

FWD switch

• Click down to steer the turret to a known fixed position.

* Optional functions. These controls will have no effect if the hardware or software features have not been integrated as part
of the turret system.

VIC

AVT

GATE

AVT

MODE

MANUAL

AUTO

ZMULTI

AID

FWD

SLEW

Summary of Contents for MX-15i






























































































































Search results

Summary of Contents for MX-15i

Reviews:

Related manuals for MX-15i

Brands by name

Popular brands

L3 Communications MX-15i, Operation & Maintenance Manual

Search results

Summary of Contents for MX-15i

Reviews:

Related manuals for MX-15i

Brands by name

Popular brands