p. 46
External Power 1
External Power 2
Simulates connection of external power supply when
aircraft is stationary on the ground.
Ground Air
Simulates connection of external conditioned air supply
when the aircraft is stationary on the ground.
APU Start
Starts APU immediately regardless of air, fuel, oil or
electrical supplies, provided APU master switch is on.
APU will continue to run if fuel and oil supplies are
available.
Engine Start
Starts all engines immediately regardless of air, fuel, oil
or electrical supplies, provided the fuel cut-off switches
are in the flow position. Engines will continue to run if
fuel and oil supplies are available.
Wheel Chocks
Simulates aircraft on wheel chocks.
Aircraft On Jacks
Simulates aircraft on jacks.
Marshaller
Selects marshaller on/off. The Marshaller is available
when the aircraft is positioned at the gate (but not at
generic airports). The marshaller is automatically
deselected by:
instructor action
when the aircraft has stopped at the gate and the
park brake has been applied for 10 seconds
during gate reposition
when pushback is in progess
IRS Instant Align
Initiates an instantaneous re-alignment of the inertial
reference system.
Hydraulic Reservoir Quantity
Left/Center/Right
Allows you to set the oil quantity for individual hydraulic
reservoirs.
Crew Oxygen
Crew Oxygen Pressure
Allows you to set the Crew Oxygen Pressure
Batteries
Main Battery
Allows you to set battery voltage between 20.0V and
32.2V.
APU Battery
Allows you to set battery voltage between 20.0V and
32.2V.
Oil Quantity
Left Engine
Right Engine
Allows you to set the oil quantity for individual engines.
Cabin Status
Cabin Status (Default: Not
Ready)
Cabin Status when Ready emulates activation of the
forward cabin ready control by the flight attendant to
indicate that all the flight checks in the cabin have
completed and the passenger cabin is ready.
